[IC]:nRF52805
[Frequency]:2.402~2.480GHz
[Protocol]:BLE5.0
[Distance]:70m
[Size]:9*9mm
[Weigth]:0.35g
[Introduction]:E104-BT5005A is a serial to BLE Bluetooth master-slave integrated module based on Bluetooth protocol version 5.0. It is small in size and low in power consumption. It works in the 2.4GHz frequency band.
Parameter | Performance | Remark |
Reference distance | 70m | Clear and open environment, height 2.0 meters; @4dBm;air speed: 2Mbps |
Bluetooth protocol | BLE5.0 | - |
Communication Interface | UART | - |
Package | SMD | - |
Interface method | 1.1 mm | - |
Dimensions | 9*9mm | - |
Antenna | Ceramic antenna | Equivalent impedance is about 50Ω |
Parameter | Min. | Typ. | Max. | Unit | Remark |
Operating voltage | 1.7 | 3.3 | 3.6 | V | ≥3.3V can guarantee output power |
Communication level | - | 3.3 | - | V | Using 5V level is risky to burn |
Working temperature | -40 | - | +85 | ℃ | Industrial design |
Operating frequency | 2402 | - | 2480 | MHz | ISM frequency band |
Emission current | - | 7.2 | - | mA | - |
Receiving current | - | 6.4 | - | mA | - |
Maximum transmit power | -3.5 | 3.8 | 4 | dBm | - |
Receiving sensitivity | - | -96 | - | dBm | Bluetooth®lowenergymode |
Sleep broadcast current((default) | - | 6 | - | uA | Unit: uA. The default broadcast interval is 1s |
Wake-up broadcast current((default) | - | 5.8 | - | mA | Unit: uA. The default broadcast interval is 1s |
Wake up without broadcast current((default) | - | 1.8 | - | mA | Unit: mA. The default connection gap is500ms |
No. | Pin item | Direction | Function | Application |
1 | SWDIO | -- | -- | -- |
2 | SWCLK | -- | -- | -- |
3 | P0.21/RST | Input | Power reset | Active low |
4 | VCC | -- | -- | The power supply is positive, the recommended power supply voltage>=3.3V |
5 | GND | -- | -- | Power ground |
6 | DISC(P0.12) | Input | Disconnect pin | Internal pull up. Active on falling edge |
7 | WKP(P0.05) | Input | Wake-up pin | Wake up: falling edge; Sleep: rising edge |
8 | P0.00 | Input/Output | -- | General GPIO |
9 | MOD(P0.04) | Input | Mode selection | Low level: configuration mode; High level: transparent transmission mode. |
10 | P0.01 | Input/Output | -- | General GPIO |
11 | RXD(P0.20) | Input | UART RX pin | -- |
12 | TXD(P0.14) | Output | UART TX pin | -- |
13 | LINK (P0.16) | Output | Connection Status | Bluetooth connectivity:Low level Bluetooth is not connected:High level |
14 | GND | -- | -- | Grand |
15 | DATA (P0.18) | Output | Data indication | Data indication pin |
Order online |
【eBay】:https://www.ebay.com/usr/cdebyte |
【Aliexpress】:https://www.aliexpress.com/store/2798183 |
【Alibaba】:https://www.alibaba.com |
For batch order/customized product |
【Sales hotline】:+86-28-61399028 Ext.812 |
【E-mail】:service@cdebyte.com |
Technical support |
【Submit online】:http://www.ebyte.com/en/apple-technology.aspx |
【E-mail】:support@cdebyte.com |
Model | Interface | IC | Frequency Hz | Power dBm | Distance m | communication protocol | Package | Size (mm) | Feature | Manual | Sample |
---|---|---|---|---|---|---|---|---|---|---|---|
E104-BT54S | UART | BLUENRG355MC | 2.4G | 8 | 0.3 | BLE 5.1 | IPEX,PCB antenna | 28*16*2.7 | New Bluetooth Module | ||
E104-BT53A3 | UART | EFR32BG22C224F512GM32 | 2.4G | 6 | 0.12 | BLE 5.2 | PCB | 13*19 | Low power,BT5.2 | ||
E104-BT12LSP-TB | USB | - | - | - | - | - | - | 46.5 * 26 | E104-BT12LSP module test board | ||
E104-BT12NSP | UART | TLSR8253F512 | 2.4G | 10 | 60 | - | PCB | 19*13 | SigMesh self-organizing network | ||
E104-BT12LSP | UART | TLSR8253F512 | 2.4G | 10 | 60 | - | PCB | 19*13 | SigMesh self-organizing network | ||
E104-BT5040UA | USB | nRF52840 | 2.4G | 8 | 0.25 | BLE 4.2/BLE 5.0 | PCB | 59 * 18 | Bluetooth SoC,USB | ||
E104-BT5005A | UART | nRF52805 | 2.4G | 4 | 0.07 | BLE 5.0 | Ceramic antenna | 9*9 | Ultra-slim size,transparent | ||
E104-BT5040U | USB | nRF52840 | 2.4G | 8 | 0.25 | BLE 4.2/BLE 5.0 | PCB | 59 * 18 | Bluetooth SoC solution, USB interface | ||
E104-BT5011A | UART | nRF52811 | 2.4G | 4 | 0.07 | BLE 5.1 | Ceramic antenna | 11.5 * 16 | Long Range feature, transparent transmission | ||
E104-BT52 | UART | DA14531 | 2.4G | 0 | 0.09 | BLE 5.0 | PCB | 14.5*10 | Low energy Bluetooth to UART module | ||
E104-BT51A | UART | CC2640R2L | 2.402~2.480GHz | 5 | 50 | BLE5.0 | PCB | 16*11.5mm | Low power Bluetooth to serial module | ||
E104-BT06 | UART | - | 2.4G | 3 | 0.08 | BLE 4.2 | PCB | 27*13 | low-power consumption | ||
E104-BT11 | UART | EFR32MG21 | 2.4G | 20 | 200m(PCB antenna)/300m(IPX antenna) | BLE Mesh | PCB/IPX | 19*13mm(PCB version)/16*13mm(IPX version) | SigMesh Ad hoc network | ||
E104-BT53A1 | UART | EFR32BG22 | 2.4G | 6 | 0.12 | BLE 5.2 | PCB | 13*19 | Low power consumption, Bluetooth 5.2 | ||
E104-BT40 | UART | - | 2.4G | 3 | 0.03 | V4.2+V3.0 SPP | PCB | 21*13 | Dual-mode Bluetooth module | ||
E104-BT51 | UART | CC2640R2F | 2.4G | 5 | 0.75 | BLE 5.0 | PCB/IPX antenna | 17.5*28.7 | Low-power transparent transmission | ||
E104-BT30 | - | CSRA64215 | 2.4G | 9 | 0.05 | V4.2+EDR | PCB | 25 *16 | BLE audio transmission | ||
E104-BT5010A | UART | nRF52810 | 2.4G | 4 | 0.055 | BLE 5.0 | Ceramic antenna | 11.5 * 16 | Bluetooth UART Transparent module | ||
E104-BT5032A | UART | nRF52832 | 2.4G | 4 | 0.06 | - | Ceramic antenna | 11.6 * 16 | Ultra low power consumption,Transparent transmission | ||
E104-BT05 | UART | TLSR8266 | 2.4G | 8 | 0.7 | BLE 4.2 | PCB | 10 * 14.5 | Low power,Continuous transmission | ||
E104-2G4U04A | USB | CC2540 | 2.4G | 4 | 0.06 | BLE 4.0 | PCB | 59 * 18 | Bluetooth SoC solution, USB | ||
E104-BT02 | UART | DA14580 | 2.4G | 0 | 0.1 | BLE 4.2 | PCB | 14*22 | Low power,Continuous transmission | ||
E104-BT01 | UART | CC2541 | 2.4G | 0 | 0.05 | BLE 4.0 | PCB | 14*22 | Low power |