[IC]:CC2640
[Frequency]:2.402~2.480GHz
[Protocol]:BLE 4.2
[Distance]:0.5km
[Interface]:I/O
[Weight]:2.0±0.1g
[Introduction]:E72-2G4M05S1B is a small size (1.27mm between pins) SMD type 2.4GHz RF module,its maximum transmitting power is 5dBm, with high performance PCB antenna, it operates at 2.402 ~ 2.480GHz with ultra-low active RF and MCU current and ultra-low current consumption in low power consumption mode.
| RF Parameter | Value | Remark |
| Working frequency | 2402~2480 MHz | Default: 2.4GHz (24MHz oscillator) |
| Transmitting power | 5 dBm | About 3.2mW |
| Receiving sensitivity | -99 dBm | Air data rate: 250kbps |
| Air data rate | 1Mbps | Please refer to ic datasheet for IEEE802.15.4 |
| Test distance | 150m / 500m | In open and clear air, with maximum power, 5dBi antenna gain, height of 2m, air data rate: 250kbps |
| Hardware Parameter | Value | Remark |
IC | CC2640F128RGZR | - |
FLASH | 128 KB | - |
RAM | 28 KB | - |
Core | M3 + M0 | - |
Size | 17.5 * 28.7 mm | - |
Antenna type | PCB / IPEX | - |
Communication interface | I/O | - |
Package | SMD | - |
| Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
| Power supply | 1.8 | 3.3 | 3.8 | V | |
| Communication level | 2.4 | 3.0 | 3.3 | V | |
| Transmitting current | 8.3 | 9.1 | 12.3 | mA | 5dBm（3.2mW） |
| Receiving current | 5.8 | 6.1 | 7.2 | mA | |
| Sleep current | 1.0 | 1.2 | 2.7 | μA | |
| Operating temperature | -40 | 20 | +85 | ℃ | |
| Operating humidity | 10 | 60 | 90 | % | |
| Storage temperature | -40 | 20 | +125 | ℃ |
| Pin No | Pin item | Pin direction | Pin application |
| 1、2、3 | GND | - | Ground electrode,connected to power source reference ground |
| 4 | DIO_0 | Input/output | GPIO, sensor controller (refer to IC datasheet) |
| 5 | DIO_1 | Input/output | GPIO, sensor controller (refer to IC datasheet) |
| 6 | DIO_2 | Input/output | GPIO, sensor controller (refer to IC datasheet) |
| 7 | DIO_3 | Input/output | GPIO, sensor controller (refer to IC datasheet) |
| 8 | DIO_4 | Input/output | GPIO, sensor controller (refer to IC datasheet) |
| 9 | DIO_5 | Input/output | High drive GPIO,sensor controller (refer to IC datasheet) |
| 10 | DIO_6 | Input/output | High drive GPIO,sensor controller (refer to IC datasheet) |
| 11 | DIO_7 | Input/output | High drive GPIO,sensor controller (refer to IC datasheet) |
| 12 | DIO_8 | Input/output | GPIO, (refer to IC datasheet) |
| 13 | DIO_9 | Input/output | GPIO, (refer to IC datasheet) |
| 14 | DIO_10 | Input/output | GPIO, (refer to IC datasheet) |
| 15 | DIO_11 | Input/output | GPIO, (refer to IC datasheet) |
| 16 | DIO_12 | Input/output | GPIO, (refer to IC datasheet) |
| 17 | DIO_13 | Input/output | GPIO, (refer to IC datasheet) |
| 18 | DIO_14 | Input/output | GPIO, (refer to IC datasheet) |
| 19 | DIO_15 | Input/output | GPIO, (refer to IC datasheet) |
| 20 | JTAG_TMS | Input/output | JTAG_TMSC, high drive capability (refer to IC datasheet) |
| 21 | JTAG_TCK | Input/output | JTAG_TMSC, high drive capability (refer to IC datasheet) |
| 22 | DIO_16 | Input/output | High drive GPIO, JTAG_TDO(refer to IC datasheet) |
| 23 | DIO_17 | Input/output | High drive GPIO, JTAG_TDO(refer to IC datasheet) |
| 24 | DIO_18 | Input/output | GPIO, (refer to IC datasheet) |
| 25 | DIO_19 | Input/output | GPIO, (refer to IC datasheet) |
| 26 | DIO_20 | Input/output | GPIO, (refer to IC datasheet) |
| 27 | GND | - | Ground electrode,connected to power source reference ground |
| 28 | DIO_21 | Input/output | GPIO, (refer to IC datasheet) |
| 29 | VDD | - | Power supply, 2.0V ~ 3.7V |
| 30 | DIO_22 | Input/output | GPIO, (refer to IC datasheet) |
| 31 | DIO_23 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 32 | nRESET | Input | Reset, low level, (referto IC datasheet) |
| 33 | DIO_24 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 34 | DIO_25 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 35 | DIO_26 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 36 | DIO_27 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 37 | DIO_28 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 38 | DIO_29 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 39 | DIO_30 | Input/output | GPIO, sensor controller, digital analog (refer to IC datasheet) |
| 40、41、42 | GND | - | Ground electrode,connected to power source reference ground |
| Order online |
| 【eBay】：https://www.ebay.com/usr/cdebyte |
| 【Aliexpress】：https://www.aliexpress.com/store/2798183 |
| 【Alibaba】：https://www.alibaba.com |
| For batch order/customized product |
| 【Sales hotline】：+86-28-61399028 Ext.812 |
| 【E-mail】：service@cdebyte.com |
| Technical support |
| 【Submit online】：http://www.ebyte.com/en/apple-technology.aspx |
| 【E-mail】：support@cdebyte.com |
| 产品 型号 | IC | Interface | Frequency Hz | Power dBm | Distance km | Communication protocol | Package | Size (mm) | Feature | 技术 手册 | 样品 购买 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E72-2G4M05S1F | I/O | CC2652RB | 2.4G | 5 | 0.35 | - | SMD | 26*16 | multi-protocol,wireless SoC module | ||
| E72-2G4M20S1E | I/O | CC2652P | 2.4G | 20 | 0.7 | - | SMD | 28.7*17.5 | High-power, high-performance, multi-protocol chip | ||
| E72-2G4M23S1A | I/O | CC2630 | 2.4G | 23 | 1.5 | ZigBee/6LoWPAN | PCB/IPX | 33.5 * 17.5 | ultra low power, dual-core ARM | ||
| E72-2G4M05S1A | I/O | CC2630 | 2.4G | 5 | 0.5 | ZigBee/6LoWPAN | PCB/IPX | 17.5 * 28.7 | Ultra low power, dual-core ARM | ||
| E72-2G4M02S2B | UART | CC2640 | 2.4G | 2 | 0.25 | BLE 4.1 | SMD | 23*14 | Low power,continuous transmission | ||
| E72-2G4M05S1B | I/O | CC2640 | 2.4G | 5 | 0.5 | BLE 4.2 | PCB/IPX | 17.5 * 28.7 | Small size, integrated ARM MCU |
