[IC]:-
[Frequency]:425~450.5MHz
[Power]:21~30dBm
[Distance]:3.0km
[Interface]:UART
[Weight]:23.9±0.1g
[Introduction]:E62-433T30D is a 1W wireless transceiver module,operating at 425-450MHz.It featues FHSS,which greatly improves the anti-interference performance, TDD,which realizes transmiting data while receiving simultanuously,and FEC algorithm, which ensures its high coding efficiency & good correction performance.
| RF Parameter | Value | Remark |
| Working frequency | 425~450.5 MHz | Default: 433MHz |
| Transmitting power | 21~30 dBm | Default: 30dBm（About 1W） |
| Receiving sensitivity | -109 dBm | Air data rate: 64kbps |
| Air data rate | 16k~128kbps | Default: 64kbps |
| Test distance | 3000m | In open and clear air, with maximum power, 5dBi antenna gain, height of 2m, air data rate: 64kbps |
| Hardware Parameter | Value | Remark |
Size | 37 * 60 mm | Without SMA |
Antenna type | SMA-K | |
Communication interface | UART | Baud rate: 1200~115200, default: 9600 |
Package | DIP | |
Buffer | 512 bytes buffer | Internal Real-time Logical Subpacking |
| Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
| Power supply | 3.3 | 5.0 | 5.2 | V | |
| Communication level | 2.5 | 3.3 | 3.6 | V | |
| Transmitting current | 589 | 640 | 704 | mA | 30dBm（1W） |
| Receiving current | 37 | 40 | 44 | mA | |
| Sleep current | - | - | - | μA | |
| Operating temperature | -40 | 20 | +85 | ℃ | |
| Operating humidity | 10 | 60 | 90 | % | |
| Storage temperature | -40 | 20 | +125 | ℃ |
| Pin No. | Pin Item | Pin Direction | Pin Application |
| 1 | M0 | Input （weak pull-up） | Work with M1 & decide the four operating modes. Floating is not allowed, can be ground. |
| 2 | LOCK | Output | Work with M0 & decide the four operating modes. Floating is not allowed, can be ground. |
| 3 | RXD | Input | TTL UART inputs, connects to external TXD (MCU, PC) output pin. Can be configured as open-drain or pull-up input. |
| 4 | TXD | Output | TTL UART outputs, connects to external RXD (MCU, PC) input pin. Can be configured as open-drain or push-pull output. |
| 5 | AUX | Output | To indicate module's working status & wakes up the external MCU. During the procedure of self-check initialization, the pin outputs low level. Can be configured as open-drain output or push-pull output (floating is allowed). |
| 6 | VCC | Input | Power supply 2.8V-5.5V DC |
| 7 | GND | Input | Ground |
| 8 | Fixing hole | Fixing hole | |
| 9 | Fixing hole | Fixing hole | |
| 10 | Fixing hole | Fixing hole | |
| 11 | Fixing hole | Fixing hole | |
| 12 | Fixing hole | Fixing hole | |
| 13 | Fixing hole | Fixing hole | |
| 14 | Fixing hole | Fixing hole | |
| 15 | Fixing hole | Fixing hole |
| Order online |
| 【eBay】：https://www.ebay.com/usr/cdebyte |
| 【Aliexpress】：https://www.aliexpress.com/store/2798183 |
| 【Alibaba】：https://www.alibaba.com |
| For batch order/customized product |
| 【Sales hotline】：+86-28-61399028 Ext.812 |
| 【E-mail】：service@cdebyte.com |
| Technical support |
| 【Submit online】：http://www.ebyte.com/en/apple-technology.aspx |
| 【E-mail】：support@cdebyte.com |
| 产品 型号 | IC | Interface | Frequency Hz | Power dBm | Distance km | Air Rate(bps) | Package | Size (mm) | Feature | 技术 手册 | 样品 购买 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E62-DTU(433D30) | 232/485 | - | 433M | 30 | 3.0 | 16k~128k | Screwing/DB9 | 82*62*25 | Full duplex | ||
| E62-433T20S | UART | - | 433M | 20 | 1.0 | 16k~128k | SMD | 17*30 | Full duplex | ||
| E62-433T30D | UART | - | 433M | 30 | 3.0 | 16k~128k | DIP | 37*60 | Full duplex | ||
| E62-DTU(433D20) | 232/485 | - | 433M | 20 | 1.0 | 16k~128k | Screwing/DB9 | 82*62*25 | Full duplex | ||
| E62-433T20D | UART | - | 433M | 20 | 1.0 | 16k~128k | DIP | 21*36 | Full duplex |
