[IC]:CC3200
[Frequency]:2.402~2.484GHz
[Power]:20dBm
[Distance]:300m
[Interface]:UART
[Weight]:2.1±0.1g
[introduction]:E103-W02, based on CC3200 of TI, is an ultra low power UART to Wi-Fi module with small size SMT packing and PCB antenna operating at 2.4 ~ 2.484GHz. It supports AT command, standard IEEE802.11b/g/n protocol and complete TCP/IP protocol stack.
RF Parameter | Value | Remark |
Working frequency | 2402~2484 MHz | Default: 2.4GHz |
Transmitting power | 20 dBm | About 100mW |
WiFi version | 802.11 b/g/n | |
Test distance | 150 meter / 500 meter | In open and clear air, with maximum power, 5dBi antenna gain, height of 2m |
Hardware Parameter | Value | Remark |
Size | 19 * 27 mm | |
Antenna type | PCB / IPEX | 50Ω characteristic impedance, adjustable |
Communication interface | UART | |
Package | SMD |
Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
Power supply | 2.4 | 3.3 | 3.6 | V | |
Communication level | 2.4 | 3.3 | 3.6 | mA | |
Transmitting current | 64 | 71 | 78 | mA | 20dBm(100mW) |
Sleep current | 4.2 | 4.6 | 5.1 | mA | |
Operating temperature | -40 | 20 | +85 | ℃ | |
Operating humidity | 10 | 60 | 90 | % | |
Storage temperature | -40 | 20 | +125 | ℃ |
Pin | Name | Type | Function |
1 | GND | - | Power ground |
2 | GPIO26 | Input/Output | Universal IO port |
3 | GPIO27 | Input/Output | Universal IO port |
4 | RST | Input | Module reset pin, low reset |
5 | SOP2 | Input | Burn simulation mode selection |
6 | SOP1 | Input | Burn simulation mode selection |
7 | SOP0 | Input | Burn simulation mode selection |
8 | GND | - | Power ground |
9 | GND | - | Power ground |
10 | VCC | - | Equipment power supply VDC: 2.4V~3.6V (300mA or more) |
11 | GND | - | Power ground |
12 | GND | - | Power ground |
13 | GND | - | Power ground |
14 | GPIO31 | Input/Output | Universal IO port |
15 | GPIO0 | Input/Output | Universal IO port |
16 | GND | - | Power ground |
17 | GND | - | Power ground |
18 | GPIO30 | Input/Output | Universal IO port |
19 | GPIO1 | Output | UART output pin, support AT command |
20 | GPIO2 | Input | UART input pin, support AT command |
21 | GPIO3 | Input/Output | Universal IO port |
22 | GPIO4 | Input/Output | Universal IO port |
23 | GPIO5 | Input/Output | Universal IO port |
24 | GPIO6 | Input/Output | Universal IO port |
25 | GPIO7 | Input/Output | Universal IO port |
26 | GPIO8 | Input/Output | Universal IO port |
27 | GPIO9 | Output | WiFi connection status indicator, connected output is low, output is not connected |
28 | GND | - | Power ground |
29 | GND | - | Power ground |
30 | GPIO10 | Output | Network connection status indicator, connected output is low, output is not connected |
31 | GPIO11 | Output | Smartconfig status indicator, low when entering status, high when not entering status |
32 | GPIO12 | Input | Restore the factory setting pin and set it low when starting. After the status indicator flashes three times, the factory setting is restored. |
33 | GPIO13 | Input/Output | Universal IO port |
34 | GPIO14 | Input/Output | Universal IO port |
35 | GPIO15 | Input/Output | Universal IO port |
36 | GPIO16 | Input/Output | Universal IO port |
37 | GPIO17 | Input/Output | Universal IO port |
38 | GPIO22 | Input/Output | Universal IO port |
39 | GPIO28 | Input/Output | Universal IO port |
40 | TDI | Input | JTAG simulation foot |
41 | TDO | Output | JTAG simulation foot |
42 | TCK | Input | JTAG simulation foot |
43 | TMS | Input/Output | JTAG simulation foot |
44 | GND | - | Power ground |
Order online |
【Alibaba】:https://www.alibaba.com |
For batch order/customized product |
【Sales hotline】:+86-28-61399028 Ext.812 |
【E-mail】:service@cdebyte.com |
Technical support |
【Submit online】:http://www.ebyte.com/en/apple-technology.aspx |
【E-mail】:support@cdebyte.com |
产品 型号 | Interface | IC | Frequency Hz | Power dBm | Distance m | communication protocol | Package | Size (mm) | Feature | 技术 手册 | 样品 购买 |
---|---|---|---|---|---|---|---|---|---|---|---|
E103-W08B | UART | ARM® Cortex®-M3 Application Processor/ARM® Cortex®-M0 Link Controller | 2.4G | 12 | - | 802.11b | - | 16*13 | WIFI re-serial module | ||
E103-W08A | UART | ARM® Cortex®-M3 Application Processor/ARM® Cortex®-M0 Link Controller | 2.4G | 12 | - | 802.11b | - | 22*13 | WIFI re-serial module | ||
E103-W07 | UART | ESP32-S2 | 2412~2484M | - | - | 802.11b/g/n | PCB/IPEX | 18*31 | WIFI MESH | ||
E103-W10 | UART | ESP8285N08 | 2.4G | 20 | 0.25 | 802.11 b/g/n | IPEX | 15*12.3mm | Serial(UART) to WIFI module | ||
E103-W06 | UART | CC3235S | 2.4G/ 5G | 18 | - | 802.11 a/b/g/n | - | 20.5*17.5 | dual-frequency wifi module | ||
E103-W06-TB | USB | - | - | - | - | - | - | 62*31mm | E103-W06 module test kit | ||
E103-W05A | UART I/O | W600 | 2.4G | 20 | 0.13 | 802.11b/g/n | PCB | 24.7*14.4*11.2 | Small size, high cost performance | ||
E103-W05C | UART I/O | W600 | 2.4G | 20 | 0.15 | 802.11b/g/n | PCB | 24*16*2.5mm(±0.2) | Cost-effective wi-fi digital transmission module | ||
E103-W05B | UART I/O | W600 | 2.4G | 20 | 0.4 | 802.11b/g/n | IPEX | 17*16*2.5mm (±0.2) | AT command, Wi-Fi data transmission module | ||
E103-W05 | UART I/O | W600 | 2.4G | 20 | 0.1 | 802.11b/g/n | PCB | 19*13*0.8 | Small size,High cost performance | ||
E103-W01-IPX | UART | ESP8266EX | 2.4GHz | 20 | 0.1 | 802.11b/g/n | PCB | 16*24 | Airkiss | ||
E103-W02 | UART | CC3200 | 2.4GHz | 20 | 0.3 | 802.11b/g/n | PCB/IPX | 27*19 | Low power,Continuous transmission | ||
E103-W01 | UART | ESP8266EX | 2.4GHz | 20 | 0.1 | 802.11b/g/n | PCB | 16*24 | Airkiss |