[IC]:-
[Frequency]:410~510MHz
[Power]:20dBm
[Distance]:2.5km
[Size]:36*21mm
[Introduction] :E49-400T20D is an ultra-high cost-effective wireless module developed by Chengdu Ebyte. There are 4 operating modes. Each transmission mode has its own characteristics and can be applied to various application scenarios. E49-400T20D perfectly supports industrial-grade applications.
Limit Parameters
Main Parameters | Performance | Remarks | |
Min. | Max | ||
Power supply(V) | 0 | 3.3 | Voltage over 5.5V will causepermanent damage to the module |
Blocking power(dBm) | - | 10 | Chances of burn is slim when modulesare used in short distance |
Operating temperature(℃) | -40 | 80 |
Operating parameter
Main Parameters | Performance | Remarks | ||
Min. | Typ. | Max. | ||
Operating voltage(V) | 2.3 | 5 | 5.5 | |
Communication level(V) | 3.3 | |||
Operating temperature(℃) | -40 | - | 80 | Industrial design |
Operating frequency(MHz) | 410 | 433 | 510 | Support ISM band |
TX Current(mA) | 75 | Instant power consumption | ||
RX current(mA) | 12 | |||
Sleep current(μA) | 0.7 | Software is shut down | ||
Max Tx power(dBm) | - | - | 20.0 | |
Receiving sensitivity(dBm) | -116 | -117 | -117 | Air data rate is 1.2kbps |
Air data rate(bps) | 1.2k | 2.4k | 200k | Controlled via user’s programming |
Main parameter | Description | Remarks |
Distance for reference | 2.5km | Test condition:clear and open area, antenna gain: 5dBi,antenna height: 2.5m,air data rate: 1.2kbps |
Sub-packet | 54 Byte | The maximum capacity of a single package is automaticallypacked after exceeding. |
Buffer | 500 Byte | |
Modulation | GFSK | |
Communication interface | UART | |
Package | DIP | |
Connector | 2.54mm pin header | |
Size | 36*21mm | |
Antenna | SMA | 50 ohm impedance |
Pin No. | Pin item | Pin direction | Application |
1 | M0 | Input(weak pull-up) | Work with M1 to decide 4 working modes of module (can be suspended, internalpull-up resistor). |
2 | M1 | Input(weak pull-up) | Work with M0 to decide 4 working modes of module (can be suspended, internalpull-up resistor). |
3 | RXD | Input | TTL UART input, connects to external TXD output pin. |
4 | TXD | Output | TTL UART output, connects to external RXD input pin. |
5 | AUX | Output | To indicate module ’s working status & wakes up the external MCU. During theprocedure of self-check initialization, the pin outputs low level. |
6 | VCC | Module power supply positive reference, voltage range: 2.6V ~ 3.3V DC | |
7 | GND | Ground | |
8 | GND | Ground | |
9 | GND | Ground | |
10 | GND | Ground |
Order online |
【eBay】:https://www.ebay.com/usr/cdebyte |
【Aliexpress】:https://www.aliexpress.com/store/2798183 |
【Alibaba】:https://www.alibaba.com |
For batch order/customized product |
【Sales hotline】:+86-28-61399028 Ext.812 |
【E-mail】:service@cdebyte.com |
Technical support |
【Submit online】:http://www.ebyte.com/en/apple-technology.aspx |
【E-mail】:support@cdebyte.com |
Model | Interface | IC | Frequency | Power | Distance | Air data rate | Package | Size | Feature | Manual | Sample |
---|---|---|---|---|---|---|---|---|---|---|---|
E49-900T20S | UART | - | 868M 915M | 20 | 2.5 | 1.2k~200k | SMD | 26 * 16 | Low power consumption | ||
E49-900M20S | SPI | CMT2300A | 868M 915M | 20 | 3 | - | SMD | 20*14 | Low power consumption | ||
E49-400M20S | SPI | - | 433M 470M | 20 | 2.5 | 0.5Kbps~300Kbps | SMD | 26 * 16 | Low power consumption, high cost performance | ||
E49-400T20S | UART | - | 433M 470M | 20 | 2.5 | 1.2k~200k | SMD | 26 * 16 | Low power consumption, low cost solution | ||
E49-400T20D | UART | - | 433M 470M | 20 | 2.5 | 1.2k~200k | DIP | 36*21 | Low power consumption, low cost solution |