[IC]：CC1310
[Frequency]：861~922.5MHz
[Power] ：30dBm
[Distance]：6km
[Size]：24*38.5mm
[Feature]：Is based on originally imported CC1310 from TI, with TTL level output, 3.3V IO port voltage,24MHz industrial high-precision low-temperature drift crystal vibration; Ensure its industrial ability and stability.
| Main parameter | Performance | Remark |
| Distance for reference | 6000m | Test condition：clear and open area, antenna gain: 5dBi,antenna height: 2.5m，air data rate: 2.5kbps |
| TX length | Transmission mode specification | See transmission mode for details |
| Buffer | 2048 Btye | - |
| Modulation | GFSK | - |
| Communication interface | UART | - |
| Package | SMD | - |
| Connector | Stamp hole | Spacing of 1.27 mm |
| Size | 24*3805 mm | - |
| Antenna | IPEX/Stamp hole | 50 ohm impedance |
| Main parameter | Min. | Typ. | Max. | Unit | Remark |
| Operating voltage | 2.2 | 3.3 | 5.5 | V | ≥3.3V ensures output power |
| Communication level | - | 3.3 | - | V | For 5V TTL, it may be at risk of burning down |
| Operating temperature | -40 | - | +85 | ℃ | Industrial design |
| Operating frequency | 861 | - | 922.5 | MHz | Support ISM band |
| Transmitting current | - | 610 | - | mA | Instant power consumption |
| Receiving current | - | 8 | - | mA | - |
| Turn-off current | - | 4 | - | μA | Software is shut down |
| Max Tx power | 29.5 | 30 | 30.5 | dBm | - |
| Receiving sensitivity | -109 | -110 | -111 | dBm | Air data rate is 5kbps |
| Air data rate | 2.5k | 2.5k | 168k | bps | Controlled via user’s programming |
| 序号 | 引脚 | 引脚方向 | 备注 |
| 1 | GND | Ground | Ground electrode |
| 2 | GND | Ground | Ground electrode |
| 3 | GND | Ground | Ground electrode |
| 4 | NC | Reserved pin | Reserved, to be floated |
| 5 | NC | Reserved pin | Reserved, to be floated |
| 6 | NC | Reserved pin | Reserved, to be floated |
| 7 | NC | Reserved pin | Reserved, to be floated |
| 8 | NC | Reserved pin | Reserved, to be floated |
| 9 | NC | Reserved pin | Reserved, to be floated |
| 10 | NC | Reserved pin | Reserved, to be floated |
| 11 | LNA_EN | Output | Internal MCU controlled LNA pin, valid in high level, connect to pin 44 |
| 12 | PA_EN | Output | Internal MCU controlled PA pin, valid in high level, connect to pin 45 |
| 13 | NC | Reserved pin | Reserved, to be floated |
| 14 | NC | Reserved pin | Reserved, to be floated |
| 15 | NC | Reserved pin | Reserved, to be floated |
| 16 | M2 | Input | M2, M1, M0 jointly decide the 8 working modes; An external 1k protective resistor shall be connected in series when in use. |
| 17 | GND | Ground | Ground electrode |
| 18 | M0 | Input | M2, M1, M0 jointly decide the 8 working modes; An external 1k protective resistor shall be connected in series and a 1M pull-up resistor shall be added when in use. (Cannot be floated, it can be grounded when not used) |
| 19 | M1 | Input | M2, M1, M0 jointly decide the 8 working modes; An external 1k protective resistor shall be connected in series and a 1M pull-up resistor shall be added when in use. (Cannot be floated, it can be grounded when not used) |
| 20 | RXD | Input | TTL serial port input connecting to external TXD pin. It can be configured as open-drain or high pull input, please refer to Parameter setting. An external 1k protective resistor shall be connected in series when in use. |
| 21 | TXD | Output | TTL serial port output connecting to external RXD input pin. It can be configured as open-drain or push-pull input, please refer to Parameter setting. An external 1k protective resistor shall be connected in series when in use. |
| 22 | TMSC | Input | JTAG TMSC |
| 23 | TMSC | Input | JTAG TCKC |
| 24 | RESET | Input | Reset pin, valid in low level |
| 25 | NC | Reserved pin | Reserved, to be floated |
| 26 | NC | Reserved pin | Reserved, to be floated |
| 27 | AUX | Output | It is used to indicate the operation status of module, for user to wake up the external MCU, the module outputs low level during self-checking and initialization at power on, it can be configured as open-drain output or pull-up output, please refer to parameter setting par. An external 1k protective resistor shall be connected in series while using (can be floated) |
| 28 | VCC | - | Power positive reference, Power supply 2.6V ~ 5.5V DC |
| 29 | VCC | - | Power positive reference, Power supply 2.6V ~ 5.5V DC |
| 30 | GND | Ground | Ground electrode |
| 31 | GND | Ground | Ground electrode |
| 32 | NC | Reserved pin | Reserved, to be floated |
| 33 | NC | Reserved pin | Reserved, to be floated |
| 34 | NC | Reserved pin | Reserved, to be floated |
| 35 | NC | Reserved pin | Reserved, to be floated |
| 36 | NC | Reserved pin | Reserved, to be floated |
| 37 | NC | Reserved pin | Reserved, to be floated |
| 38 | NC | Reserved pin | Reserved, to be floated |
| 39 | NC | Reserved pin | Reserved, to be floated |
| 40 | NC | Reserved pin | Reserved, to be floated |
| 41 | NC | Reserved pin | Reserved, to be floated |
| 42 | NC | Reserved pin | Reserved, to be floated |
| 43 | NC | Reserved pin | Reserved, to be floated |
| 44 | LNA_EN | Input | Internal LNA pin, valid in high level, connect to pin 11 |
| 45 | PA_EN | Input | Internal LNA pin, valid in high level, connect to pin 11 |
| 46 | GND | Ground | Ground electrode |
| 47 | GND | Ground | Ground electrode |
| 48 | ANT | - | Antenna (50Ω characteristic impedance) |
| Order online |
| 【Aliexpress】： |
| 【Amazon】： |
| 【Aliexpress】： |
| 【Alibaba】：https://www.alibaba.com |
| For batch order/customized product |
| 【Sales hotline】：+86-28-61399028 Ext.812 |
| 【E-mail】：service@cdebyte.com |
| Technical support |
| 【Submit online】：http://www.ebyte.com/en/apple-technology.aspx |
| 【E-mail】：support@cdebyte.com |
| Model | Interface | IC | Frequency Hz | Power dBm | Distance km | Air data rate | Package | Size (mm) | Feature | Manual | Sample |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E70-900T30S | UART I/O | CC1310 | 868M 915M | 30 | 6 | 2.5k~168k | SMD | 24*38.5 | High-speed continuous transmission | ||
| E70-900T14S | UART I/O | CC1310 | 868M 915M | 14 | 1.5 | 2.5k~168k | SMD | 16*26 | High-speed continuous transmission | ||
| E70-900T14S2 | UART I/O | CC1310 | 868M 915M | 14 | 1.5 | 2.5k~168k | SMD | 14 * 20 | Dual-core ARM,high-speed continuous transmission | ||
| E70-900M14S1B | UART I/O | CC1312R | 868M/915M | 14 | 1.5 | 20k~1000k | SMD | 16 * 26 | ARM processor | ||
| E70-915NW30S | UART | - | 915M | 30 | 6.5 | 2.5k~168k | SMD | 24 * 38.5 | Star hoc network for one-master | ||
| E70-915NW14S | UART | - | 915M | 14 | 2.5 | 2.5k~168k | SMD | 16 * 26 | Star hoc network for one-master | ||
| E70-DTU(433NW30-GPRS) | - | - | 433M | 30 | 6.5 | - | Pressure line | 108*75*37 | Star Network | ||
| E70-433NW30S | UART | CC1310 | 433M | 30 | 6.5 | 5k~50k | SMD | 24*38.5 | Network series | ||
| E70-433NW14S | UART | CC1310 | 433M | 14 | 2.5 | 5k~50k | SMD | 16*26 | Network series | ||
| E70-DTU(433NW30) | RS232 RS485 | - | 433M | 30 | 6.5 | 5k~50k | Pressure line | 82*62*25 | Star Network | ||
| E70-DTU(433NW30-ETH) | Ethernet | - | 433M | 30 | 6.5 | 5k~50k | RJ45 | 82*62*25 | Star shaped network | ||
| E70-915T14S | UART/IO | CC1310 | 915M | 14 | 1.5 | 2.5k~168k | SMD | 16*26 | Super small size, dual-core ARM | ||
| E70-868T14S | UART/IO | CC1310 | 868M | 14 | 1.5 | 2.5k~168k | SMD | 16*26 | Super small size, dual-core ARM | ||
| E70-433T14S | UART/IO | CC1310 | 433M | 14 | 1.0 | 2.5k~168k | SMD | 16*26 | Super small size, dual-core ARM | ||
| E70-915T30S | UART/IO | CC1310 | 915M | 30 | 6.0 | 2.5k~168k | SMD | 24*38.5 | Continuous transmission, dual core | ||
| E70-868T30S | UART/IO | CC1310 | 868M | 30 | 6.0 | 2.5k~168k | SMD | 24*38.5 | Continuous transmission, dual core | ||
| E70-433T30S | UART/IO | CC1310 | 433M | 30 | 6.0 | 2.5k~168k | SMD | 24*38.5 | Continuous transmission, dual core | ||
| E70-915T14S2 | UART | CC1310 | 915M | 14 | 1.5 | 2.5k~50k | SMD | 14*20 | Super small size, dual-core ARM | ||
| E70-868T14S2 | UART | CC1310 | 868M | 14 | 1.5 | 2.5k~50k | SMD | 14*20 | Super small size, dual-core ARM | ||
| E70-433T14S2 | UART | CC1310 | 433M | 14 | 1.0 | 2.5k~50k | SMD | 14*20 | Super small size, dual-core ARM |
