[IC]:CC1101
[Frequency]:410-450MHz
[Power]:10dBm
[Distance]:1.5km
[Size]:14*20mm
[Introduction]:E07-400M10S is an independently developed 410-450MHz SMD wireless module based on the CC1101 chip produced by Texas Instruments (TI), using industrial-grade high-precision 26MHz crystal oscillator.
Main parameter | Performance | Remark |
Reference distance | 1.5km | Test condition:clear and open area, antenna gain: 5dBi,antenna height: 2.5m,air data rate: 1.2kbps |
FIFO | 64Byte | Maximum length of a single transmission |
Crystal Oscillator | 26MHz | 10ppm |
Modulation | GFSK(recommended) | Support OOK、ASK、GFSK、2-FSK、4-FSK and MSK |
Package | SMD | - |
Interface method | 1.27mm | Half hole |
Communication Interface | SPI | 0~10Mbps |
Size | 14*20mm | - |
Antenna | IPEX/STAMP | 50 ohm impedance |
Parameter | Min. | Typ. | Max. | Unit | Remark |
Operating voltage | 1.8 | 3.3 | 3.6 | V | ≥3.3V ensures output power |
Operating frequency | 410 | 433 | 450 | MHz | Support ISM band |
Communication level | - | 3.3 | - | V | For 5V TTL, it may be at risk of burning down |
TX current | - | 35 | - | mA | Instant power consumption |
RX current | - | 18 | - | mA | - |
Sleep current | - | 0.6 | - | μA | Shut down by software |
Operating temperature | -40 | - | +85 | ℃ | Industrial grade |
Max TX power | 9.5 | 10 | 11 | dBm | - |
Receiving sensitivity | -107 | -108 | -109 | dBm | Air data rate is 1.2kbps |
Air data rate | 0.6k | - | 500k | bps | Controlled via user’s programming |
Pin No. | Item | Direction | Description |
1 | GND | - | Ground wire, connected to the power reference ground |
2 | GND | - | Ground wire, connected to the power reference ground |
3 | GND | - | Ground wire, connected to the power reference ground |
4 | GND | - | Ground wire, connected to the power reference ground |
5 | GND | - | Ground wire, connected to the power reference ground |
6 | NC | - | No need to connect |
7 | NC | - | No need to connect |
8 | NC | - | No need to connect |
9 | VCC | - | Power supply, 2.5~3.6V (It is also recommended to add external ceramic filter capacitor) |
10 | NC | - | No need to connect |
11 | GND | - | Ground wire, connected to the power reference ground |
12 | GND | - | Ground wire, connected to the power reference ground |
13 | NC | - | No need to connect |
14 | GD02 | - | CC1101 chip pins (see CC1101 official user manual for details) |
15 | GD00 | - | CC1101 chip pins (see CC1101 official user manual for details) |
16 | MISO/GD01 | Output | SPI master output slave input |
17 | MOSI | Input | SPI master input slave output |
18 | SCK | Input | Serial Clock Input |
19 | CSN | Input | SPI Chip select for starting SPI communication |
20 | GND | - | Ground wire, connected to the power reference ground |
21 | ANT | Input/Output | Antenna, stamp hole(50 ohm impedance) |
22 | GND | - | Ground wire, connected to the power reference ground |
Model | IC | Interface | Frequency Hz | Power dBm | Distance km | Air data rate | Package | Size (mm) | Feature | Manual | Sample |
---|---|---|---|---|---|---|---|---|---|---|---|
E07-900MBL-01 | USB | - | - | - | - | - | - | 53*27mm | E07 series module test board | ||
E07-400MBL-01 | USB | - | - | - | - | - | - | 53*27mm | E07 series module test board | ||
E07-900M10S | SPI | CC1101 | 868M | 10 | 1.5 | 0.6k~500k | SMD | 14*20m | Small Size,low-power consumption | ||
E07-400M10S | SPI | CC1101 | 433M | 10 | 1.5 | 0.6k~500k | SMD | 14*20m | Small Size,low-power consumption | ||
E07-433M20S | SPI | CC1101 | 433M | 20 | 2.0 | 0.6k~500k | SMD | 18*32 | Small size, low power consumption | ||
E07-M1101D-TH | SPI | CC1101 | 433M | 10 | 0.5 | 1.2k~500k | DIP | 15*30 | High performance,low power consumption | ||
E07-M1101D-SMA | SPI | CC1101 | 433M | 10 | 0.6 | 1.2k~500k | DIP | 15*30 | High performance,low power consumption |