[IC] : CC2530
[Frequency] : 2.40~2.48GHz
[Power] : 27dBm
[Distance] : 800m
[Size] : 16*27mm
[Antenna ] : PCB on board antenna
[Introduce] : E18-2G4Z27SP is a small size 2.4GHz ZigBee wireless module designed and produced by Ebyte, SMD, PCB on-board antenna, transmission power 500mW, pin spacing 1.27mm,suitable for a variety of application scenarios (especially smart Home).
| Main parameter | Min. | Typ. | Max. | Unit | Remark |
| Operating voltage | 2.5 | 3.3 | 3.6 | V | ≥3.3V ensures output power |
| Communication level | - | 3.3 | - | V | For 5V TTL, it may be at risk of burning down |
| TX current | - | 500 | - | mA | Instantaneous power consumption @27dBm |
| RX current | - | 36 | - | mA | - |
| Sleep current | - | 2.5 | - | uA | Software is shut down |
| Operating temperature | -40 | - | +85 | ℃ | Industrial design |
| Operating frequency | 2.400 | - | 2.480 | GHz | Support ISM band |
| Max TX power | 26.8 | 27 | 27.4 | dBm | - |
| Receiving sensitivity | -98 | -99 | -100 | dBm | Air data rate is 250kBps |
| Main parameter | Performance | Remark |
| Distance for reference | 1600m | PCB on board antenna |
| Protocol supported | ZigBee | - |
| Communication interface | I/O | All IO ports lead |
| Packaging | SMD | - |
| Connector | 1.27mm | - |
| IC | CC2530F256RHAT/QFN40 | Built-in PA+LNA |
| FLASH | 256kB | - |
| RAM | 8kB | - |
| Core | 8051 | - |
| Size | 16*27.0mm | - |
| Antenna | PCB on board antenna | Equivalent impedance is about 50Ω |
| Pin No. | Pin item | Pin direction | Pin application |
| 1 | GND | Input | Ground wire, connected to the power reference ground |
| 2 | VCC | Input | The power supply must be between 2.5～3.6V |
| 3 | P2.2 | Input/Output | MCU GPIO |
| 4 | P2.1 | Input/Output | MCU GPIO |
| 5 | P2.0 | Input/Output | MCU GPIO |
| 6 | P1.7 | Input/Output | MCU GPIO |
| 7 | P1.6 | Input/Output | MCU GPIO |
| 8 | NC | - | Void |
| 9 | NC | - | Void |
| 10 | P1.5 | Input/Output | MCU GPIO |
| 11 | P1.4 | Input/Output | MCU GPIO |
| 12 | P1.3 | Input/Output | MCU GPIO |
| 13 | P1.2 | Input/Output | MCU GPIO |
| 14 | P1.1 | Output | MCU GPIO, PA transmitting control pin |
| 15 | P1.0 | Output | MCU GPIO, PA receiving control pin |
| 16 | P0.7 | Input/Output | MCU GPIO |
| 17 | P0.6 | Input/Output | MCU GPIO |
| 18 | P0.5 | Input/Output | MCU GPIO |
| 19 | P0.4 | Input/Output | MCU GPIO |
| 20 | P0.3 | Input/Output | MCU GPIO |
| 21 | P0.2 | Input/Output | MCU GPIO |
| 22 | P0.1 | Input/Output | MCU GPIO |
| 23 | P0.0 | Input/Output | MCU GPIO |
| 24 | RESET | Input | Reset port |
| Order online |
| 【eBay】：https://www.ebay.com/usr/cdebyte |
| 【Aliexpress】：https://cdebyte.pt.aliexpress.com |
| 【Aliexpress】：https://www.aliexpress.com/store/2798183 |
| 【Alibaba】：https://www.alibaba.com |
| For batch order/customized product |
| 【Sales hotline】：+86-28-61399028 Ext.812 |
| 【E-mail】：service@cdebyte.com |
| Technical support |
| 【Submit online】：http://www.ebyte.com/en/apple-technology.aspx |
| 【E-mail】：support@cdebyte.com |
| Model | IC | Interface | Frequency Hz | Power dBm | Distance km | Air data rate | Package | Size (mm) | Feature | Manual | Sample |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E18-2G4Z27SP | I/O | CC2530 | 2.4G | 27 | 0.8 | - | SMD | 16*27 | ZigBee | ||
| E18-MS1PA2-PCB | UART I/O | CC2530 | 2.4G | 20 | 0.8 | - | SMD | 16 * 27 | ZigBee ad hoc network module | ||
| E18-MS1PA2-IPX | UART I/O | CC2530 | 2.4G | 20 | 1.2 | - | SMD | 16 * 22.5 | ZigBee Ad Hoc Network Module | ||
| E18-2G4U04B | USB | CC2531 | 2.4G | 4 | 0.2 | 250k | SMD | 59*18 | Zigbee | ||
| E18-2G4Z27SI | IO | CC2530 | 2.4G | 27 | 2.5 | 250k | SMD | 16*22.5 | Zigbee | ||
| E18-MS1-IPX | IO | CC2530 | 2.4G | 4 | 0.24 | 250k | SMD | 14.1*20.8 | Zigbee, with shield | ||
| E18-MS1PA1-IPX | IO | CC2530 | 2.4G | 20 | 1.0 | 250k | SMD | 16*22.5 | Zigbee, with shield | ||
| E18-MS1-PCB | UART/IO | CC2530 | 2.4G | 4 | 0.2 | 250k | SMD | 14.1*23 | Zigbee, with shield | ||
| E18-MS1PA1-PCB | IO | CC2530 | 2.4G | 20 | 0.8 | 250k | SMD | 16*27 | Zigbee, with shield |
