KENTROX DataSMART T3/E3 IDSU DSU

DATASMART T3 E3 SA AC SNMP IDSU DSU CSU

MFG Part #:15951 Item #:114370 Limited Supply Available!

The Kentrox DataSMART T3/E3 IDSU (Intelligent Data Service Unit) provides economical and flexible access for high-speed data networking. The DataSMART T3/E3 IDSU provides powerful access for bandwidth-intensive Frame Relay and high-speed router applications. With a selectable T3 or E3 network interface, the DataSMART IDSU supports worldwide enterprise applications. And with a HSSI and V.35/EIA-530/X.21 data port, the versatile IDSU supports almost any data requirement. For maximum flexibility, these data ports support both full T3/E3 bandwidth and variable clock rates in Nx.5 Mbps increments. These variable clock rates allow users to control the amount of bandwidth utilized.Ideal for carrier backbone connectivity, this IDSU can support router and Frame Relay backbone applications. The DataSMART IDSU is also ideal for enterprise networks requiring increased bandwidth for Internet and corporate LAN access traffic.

$2,872.99Original Price: $4,595.00You Save: $1,722.01

Product Specs WikiBytes Similar Products

General Information
Manufacturer:	Kentrox, LLC
MFG Part #:	15951
Product Line:	DataSMART
Product Type:	T3/E3 DSU

Technical Information
Data Encoding:	HDB3
Diagnostic Features:	Loopbacks: Line, local, payload, compatible with T1.107 and T1.107a

Interfaces/Ports
Ports:	2 x RJ-45 Port Management 1 x Serial V.35 Network 1 x 50-pin SCSI-2 Physical 2 x BNC Network Connector
Electrical Interface:	EIA-232D Serial V.35 RS-422/423 HSSI

Media & Performance
Data Transfer Rate:	8Mbps DTE V.35 9.6Kbps DTE V.35 44.74Mbps Network 34.37Mbps Network 44Mbps DTE HSSI 34Mbps DTE HSSI

Management & Protocols
Management:	SNMP

Power Description
Input Voltage:	85 V AC to 265 V AC
Frequency:	47 Hz to 63 Hz
Power Consumption:	30 W Operating 24 W

Environmental Conditions
Temperature:	0 °C (32 °F) to 50 °C (122 °F) Operating -20 °C (-4 °F) to 70 °C (158 °F) Storage
Humidity:	5 to 95% Non-condensing Relative Humidity

Physical Characteristics
Dimensions:	1.7" Height x 16.75" Width x 11.5" Depth
Shipping Dimensions:	6.5" Height x 16.25" Width x 20.25" Depth
Weight:	12 lb
Shipping Weight:	14 lb

Miscellaneous
Additional Information:	T3 Network Interface: - Framing: M13/C-bit parity (selectable) - Impedance: 75 ohm coax - Input Signal: +6.2 dBm to -11.7 dBm - Monitoring: Monitoring jacks with 20 dB attenuation - Output Signal: DSX-3 or DS-3 high (selectable) - Standards: T1.102, T1.404, TR-TRS-000499 - Timing Sources: Looped or internal clock E3 Network Interface: - Connector: BNC socket or 1.6/5.6 DIN - Connector: BNC or 1.6/5.6 DIN (via adapter) - Electrical: 75 ohm coax - Framing: ITU-T G.751 - Impedance: 75 ohm coax - Output signal: ITU-T G.703 - Timing sources: Looped or internal clock Data Port - V.35/EIA-530: - Configuration: Non-volatile RAM - Control ports: DCE, DTE - Options: ASCII Terminal, SNMP, Modem, Other NMS Performance Monitoring: - Alarm status: Loss of Signal (LOS), Out of Frame (OOF), Alarm Indication (AIS), Yellow Alarm (YEL), Test/active - Error counts: Last 24 hours in 15 minute increments - Error Events: Event errors, Errored seconds, Vursty seconds, Severly errored seconds, Unavailable seconds, % available seconds, % error free seconds Alarms: - Alarm Relay: Normally open, normally close, common - Alarm Reports: Local/remote message, Auto alarm dial out, Alarm history - Alarm Types: Loss of Signal (LOS), Out of Frame (OOF), Alarm Indication (AIS), Excessive error rate, Equipment failure, Alarms cleared - Messages Info: Time and date stamp, Set or clear stamp, Alarm type, Unit address, Unit ID (user defined)
Certifications & Standards:	EMI/EMC: - FCC Part 15 - EN 55022 (Internation version only) - EN 50082-1 (International version only) Safety: - NRTL listed to UL 1459 - CSA 22.2 No. 950 with 0.7 - EN60950 (internation version only)

Miscellaneous

Additional Information:

T3 Network Interface: - Framing: M13/C-bit parity (selectable) - Impedance: 75 ohm coax - Input Signal: +6.2 dBm to -11.7 dBm - Monitoring: Monitoring jacks with 20 dB attenuation - Output Signal: DSX-3 or DS-3 high (selectable) - Standards: T1.102, T1.404, TR-TRS-000499 - Timing Sources: Looped or internal clock
E3 Network Interface: - Connector: BNC socket or 1.6/5.6 DIN - Connector: BNC or 1.6/5.6 DIN (via adapter) - Electrical: 75 ohm coax - Framing: ITU-T G.751 - Impedance: 75 ohm coax - Output signal: ITU-T G.703 - Timing sources: Looped or internal clock
Data Port - V.35/EIA-530: - Configuration: Non-volatile RAM - Control ports: DCE, DTE - Options: ASCII Terminal, SNMP, Modem, Other NMS
Performance Monitoring: - Alarm status: Loss of Signal (LOS), Out of Frame (OOF), Alarm Indication (AIS), Yellow Alarm (YEL), Test/active - Error counts: Last 24 hours in 15 minute increments - Error Events: Event errors, Errored seconds, Vursty seconds, Severly errored seconds, Unavailable seconds, % available seconds, % error free seconds
Alarms: - Alarm Relay: Normally open, normally close, common - Alarm Reports: Local/remote message, Auto alarm dial out, Alarm history - Alarm Types: Loss of Signal (LOS), Out of Frame (OOF), Alarm Indication (AIS), Excessive error rate, Equipment failure, Alarms cleared - Messages Info: Time and date stamp, Set or clear stamp, Alarm type, Unit address, Unit ID (user defined)

Certifications & Standards:

EMI/EMC: - FCC Part 15 - EN 55022 (Internation version only) - EN 50082-1 (International version only)
Safety: - NRTL listed to UL 1459 - CSA 22.2 No. 950 with 0.7 - EN60950 (internation version only)

Warranty
Standard Warranty:	5 Year

Action Shots Reviews Discussions 0 Comments

Add Your Comment

ADD COMMENT

Customer Support

Policies

Company Info

Shopping Help