SIIG Cyber 2S1P Plus PCI Serial/Parallel Combo Adapter
2SER 1PAR 16650 ECP EPP CYBER 2S1P PLUS
MFG Part #:JJ-P21012-S5
Item #:109658
Temporarily Out of Stock
Click the "NOTIFY ME" button to be notified when this item is available
- » Two serial (16650) and one ECP/EPP parallel port, Universal PCI card design with built-in 32-byte FIFO buffers
- »
- » Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
- » Two high-speed 16650 UART serial port (9-pin) supports data rate up to 460 Kbps
- » Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB
- » Parallel Port supports EPP/ECP, BPP (bi-directional), SPP (standard) parallel port modes
$63.99Original Price: $69.99You Save: $6.00Ground Shipping Only $6.08
| General Information | |
|---|---|
| Manufacturer: | Siig, Inc |
| MFG Part #: | JJ-P21012-S5 |
| Packaged Quantity: | 1 |
| Packing: | Box |
| Package Type: | Retail |
| Product Type: | Serial/Parallel Combo Adapter |
| Technical Information | |
|---|---|
| Host Interface: | PCI |
| Data Transfer Rate: | Up to 460Kbps |
| Buffer: | 64Byte |
| UART Type: | 16650 |
| IRQ: | IRQ sharing eliminates conflicts |
| Controller Type: | SIIG CyberPro |
| Parallel Port Modes: | ECP
EPP EPP/ECP BPP SPP |
| Interfaces/Ports | |
|---|---|
| Ports: | 1 x 25-pin DB-25 Female IEEE 1284 Parallel
2 x 9-pin DB-9 Male RS-232 Serial |
| Power Description | |
|---|---|
| Input Voltage: | 3.3 Vor 5 V |
| Physical Characteristics | |
|---|---|
| Shipping Dimensions: | 6.38" Height x 8.75" Width x 1.5" Depth |
| Shipping Weight: | 1 lb |
| Miscellaneous | |
|---|---|
| Package Contents: | (1) Cyber 2S1P Plus card
(1) DB9 (9-pin) serial port cable (for 2nd serial port) (1) Driver CD (1) Quick Installation Guide |
| Additional Information: | Regulatory approval(s): FCC Class B (DoC) & CE
OS support: Windows 95/98/98SE/ME/NT4.0/2000/XP/Server 2003 Chip: CyberPro Bus type: 32-bit PCI Port type: Two 9-pin RS232 serial port & one 25-pin parallel port IRQ sharing reduces IRQ conflicts Built-in 64-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment 4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection Supports 3.3V operation with 5V tolerance Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible Supports PME (Power Management Event). Allows device to request a change in system power state (wake up system) Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance/reliability Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance/reliability |
| System Requirements: | Pentium or equivalent computer with an available 32-/64-bit PCI or PCI-X slot
Windows 95 or later |
| Certifications & Standards: | Regulatory approval(s): FCC Class B (DoC) & CE |
| Warranty | |
|---|---|
| Standard Warranty: | 5 Year Limited |
