BUSLINK 52x24x52x Internal IDE CD-RW Drive
CDRW 52X/24X/52X EIDE BEIGE 5.25HH W/ NERO AUTHORING SW
MFG Part #:RW-5252
Item #:70382
Temporarily Out of Stock
Click the "NOTIFY ME" button to be notified when this item is available
Trust your important data with BUSlink CD-RW drives! With their superior quality, speed, features and bundled software BUSlink CD-RW drives are your best choice for creating CDs.
$49.99Ground Shipping Only $7.19
| General Information | |
|---|---|
| Manufacturer: | Buslink Media |
| MFG Part #: | RW-5252 |
| Product Type: | CD-Writer |
| Technical Information | |
|---|---|
| Maximum Write Speed: | 52x |
| Maximum Rewrite Speed: | 24x |
| Maximum Read Speed: | 52x |
| Data Transfer Rate: | 6000KBps Write
1800KBps Re-write 7200KBps Read |
| Access Time: | 80 ms Average |
| Media Load Type: | Tray |
| Mount Type: | Horizontal & Vertical |
| Controls/Indicators | |
|---|---|
| Indicators & Controls: | Front Panel:
Busy/Write LED Volume Control Headphone Jack Emergency Eject Pin Hole Stop/EjectRear Panel: IDE Interface Connector Audio Output Power Input Mode selector Jumper |
| Software | |
|---|---|
| Software Included: | Nero Burning Rom Authoring Software |
| Reliability | |
|---|---|
| MTBF: | 70000 Hour |
| Power Description | |
|---|---|
| Input Voltage: | 5 V DC to 12 V DC |
| Environmental Conditions | |
|---|---|
| Temperature: | 41 °F (5 °C) to 113 °F (45 °C) Operating |
| Humidity: | 15 to 80% Operating |
| Physical Characteristics | |
|---|---|
| Form Factor: | Internal |
| Dimensions: | 1.6" Height x 5.7" Width x 7.5" Depth |
| Shipping Dimensions: | 4.25" Height x 11" Width x 12" Depth |
| Weight: | 2.2 lb |
| Shipping Weight: | 2.98 lb |
| Miscellaneous | |
|---|---|
| Package Contents: | Quick Installation Guide
Nero Burning Rom Authoring Software Audio Cable Mounting Screws |
| Additional Information: | 52X Zone-CLV Writing, 24X Re-write & 52X Max CAV Reading
Average access time is 80 ms (typical) Access all format CD-ROM , CD-R , CD-RW title & disc Conforms to Orange Book Part 2, 3 & Volume 2 : High Speed Vibration Absorber System (VAS)R to reduce vibration & noise Buffer Under Run Free Standard ATAPI/E-IDE interface supporting DMA, MMC2 commands Plug & Play ready ; Emergency manual eject Supporting DOS, Win 3.1/95/98/2000/NT/ME/XP Media condition check & Data verifying function |
| System Requirements: | Pentium II processor at 350 MHZ or higher
Or Celeron 350 processor or higher Or K6-2 processor at 380 MHz or higher At least 32 MB RAM Windows 95, 98, 98se, ME, NT4, XP & 2000. |
| Certifications & Standards: | - CE
UL CSA TUV FCC EMI CB Nemko C-TICK BSMI Korea EMC DHHS |
| Warranty | |
|---|---|
| Standard Warranty: | 1 Year Limited |





