[IC] :CC2530
[Frequency] :2.4~2.48GHz
[Power]:20dBm
[Distance] : 800m
[Size]:16*27.0mm
[Weight]:1.8±0.1g
[Introduction] : E18-MS1PA2-PCB is small-sized 2.4GHz ZigBee wireless module, which is designed and produced by Chengdu Ebyte. SMD type with pcb antenna, with a transmission power of 100mW and the pin pitch is 1.27mm. It is applicable for various applications (especially smart home).
Operating parameter
Main Parameters | Value | Remarks | ||
Min. | Typical | Max | ||
Operating voltage(V) | 2.0 | 3.3 | 3.6 | ≥3.3 V ensures output power |
Communication level(V) | - | 3.3 | - | For 5V TTL, it may be at risk of burning down |
Operating temperature(℃) | -40 | - | 85 | Industrial design |
Operating frequency(MHz) | 2.400 | - | 2.480 | ISM band |
TX Current(mA) | - | 98 | - | Instant power consumption |
RX current(mA) | - | 36 | - | - |
Sleep current(μA) | - | 2 | - | Shut down by software |
Max Tx power(dBm) | 19.6 | 20 | 20.5 | - |
Receiving sensitivity(dBm) | -99 | -98 | -97 | Air data rate is 250 kbps |
Main parameter | Description | Remarks |
Reference distance | 800m | Test condition: clear and open area, antennna gain: 5dBi,antenna height: 2.5m, aur data rate: 250kbps |
Protocol | ZigBee | - |
Communication interface | I/O | All IO ports lead out |
Package | SMD | - |
Interface | 1.27mm | - |
IC | CC2530F256RHAT/QFN40 | Built-in PA+LNA |
FLASH | 256KB | - |
RAM | 8KB | - |
Core | 8051 | - |
Size | 16*27mm | - |
Antenna | PCB | 50 ohm impedance |
序号 | 引脚 | 引脚方向 | 备注 |
1 | GND | Input | Ground, connecting to power supply reference ground |
2 | VDD | Input | Power supply, must be 2.0-3.6V |
3 | P2.2 | Input /Output | MCU GPIO |
4 | P2.1 | Input /Output | MCU GPIO |
5 | P2.0 | Input /Output | MCU GPIO |
6 | P1.7 | Input /Output | MCU GPIO |
7 | P1.6 | Input /Output | MCU GPIO |
8 | NC | - | N.C. |
9 | NC | - | N.C. |
10 | P1.5 | Input /Output | MCU GPIO |
11 | P1.4 | Input /Output | MCU GPIO |
12 | P1.3 | Input /Output | MCU GPIO |
13 | P1.2 | Input /Output | MCU GPIO |
14 | P1.1 | Output | MCU GPIO,PA transmission control pin |
15 | P1.0 | Output | MCU GPIO,PA receiving control pin |
16 | P0.7 | Input /Output | MCU GPIO |
17 | P0.6 | Input /Output | MCU GPIO |
18 | P0.5 | Input /Output | MCU GPIO |
19 | P0.4 | Input /Output | MCU GPIO |
20 | P0.3 | Input /Output | MCU GPIO |
21 | P0.2 | Input /Output | MCU GPIO |
22 | P0.1 | Input /Output | MCU GPIO |
23 | P0.0 | Input /Output | MCU GPIO |
24 | RESET | Input | Reset port |
Order online |
【eBay】:https://www.ebay.com/usr/cdebyte |
【Aliexpress】:https://www.aliexpress.com/store/2798183 |
【Alibaba】:https://www.alibaba.com |
For batch order/customized product |
【Sales hotline】:+86-28-61399028 Ext.812 |
【E-mail】:service@cdebyte.com |
Technical support |
【Submit online】:http://www.ebyte.com/en/apple-technology.aspx |
【E-mail】:support@cdebyte.com |
Model | IC | Interface | Frequency Hz | Power dBm | Distance km | Air data rate | Package | Size (mm) | Feature | Manual | Sample |
---|---|---|---|---|---|---|---|---|---|---|---|
E18-2G4Z27SP | I/O | CC2530 | 2.4G | 27 | 0.8 | - | SMD | 16*27 | ZigBee | ||
E18-MS1PA2-PCB | UART I/O | CC2530 | 2.4G | 20 | 0.8 | - | SMD | 16 * 27 | ZigBee ad hoc network module | ||
E18-MS1PA2-IPX | UART I/O | CC2530 | 2.4G | 20 | 1.2 | - | SMD | 16 * 22.5 | ZigBee Ad Hoc Network Module | ||
E18-2G4U04B | USB | CC2531 | 2.4G | 4 | 0.2 | 250k | SMD | 59*18 | Zigbee | ||
E18-2G4Z27SI | IO | CC2530 | 2.4G | 27 | 2.5 | 250k | SMD | 16*22.5 | Zigbee | ||
E18-MS1-IPX | IO | CC2530 | 2.4G | 4 | 0.24 | 250k | SMD | 14.1*20.8 | Zigbee, with shield | ||
E18-MS1-PCB | UART/IO | CC2530 | 2.4G | 4 | 0.2 | 250k | SMD | 14.1*23 | Zigbee, with shield |