The difference and advantage between high-speed continuous transmission and LORA

High-speed continuoustransmission modem, support Modbus protocol, ultra long-distance, unlimitedpacket length, continuous transmission without interruption,low-latency/high-response half-duplex communication; multiple power options,support RS232 and RS485 interfaces, suitable for : High-speed continuoustransmission, industrial control Modbus, RC flight control.  

1

Continuoustransmission: At continuous transmission, the length ofthe data transmitted is unlimited, which enables continuous

transmission at baud rate of57600/38400/19200/9600/4800/2400/1200.

l Fixed-length transmission: Air data rate, FEC,password etc. are configurable for users. Users transmit data to other modules

with configured air data rate in the mostefficient way, which achieves low-latency and high-response.

l User password: 65536 configurable addresses are reservedfor users to define, which makes the module with matched password

receive the data.

lModbus: 433M features high speed and low latency. It issuitable for polling sampling, handshake response

communication, and supports Modbusprotocols.

l Broadcast transmission: When the module address is set as 0xFFFF,the module can communicate with other modules in the

same channel. That enables broadcast andmonitor.

l FEC: Forward Error Correction has high coding efficiency &good correction performance. In case of sudden interference, it can

correct the interfered data packetsproactively, so that the reliability & transmission range are improvedcorrespondingly. Without

FEC, those data packets can only bedropped.

l Watchdog: With a built-in watchdog, the module runsprecise layout and time. Once an exception occurs, the module will restart

in 0.107 second, and continue to work according to theprevious parameters.

LoRa spread spectrum technology, makesthe transmission distance and penetration ability are two times thantraditional FSK; active correction of interfered data packets, makingcommunication distance farther, anti-interference ability stronger; ultra-lowpower consumption.

LoRa: LoRaspread-spectrum means the transmitting distance is much longer than before.Confidentiality is high and the

possibility of being intercepted isextremely low Strong ability of anti-interference, which has a stronginhibitory capacity for the

Co-Channel Interference and all kinds ofnoises, and with excellent performance of anti multipath fading.

regulate overall power consumption bysetting receiving response delay; The maximum receiving response delay can beconfigured

as 2000ms,and the average current is about 30uA.

networking and repeater. For example:module A transmits AA BB CC to module B (address: 0x00 01, channel: 0x80), HEXformat is

00 01 80 AA BB CC (00 01 refers to theaddress of module B, 80 refers to the channel of module B), then module Breceives AA BB CC

(only module B).

channel.

correct the interfered data packetsproactively, so that the reliability & transmission range are improvedcorrespondingly. Without

FEC, those data packets can only bedropped.

available. The typical current is 6.0uA inthis mode.

seconds, and will continue to work on theprevious parameter Settings.

modules work as the previous parameters.

suitablefor the environment with small packet, long transmission distance andvulnerable to interference.